Your component requirements.
Explore the workpiece materials, shapes and production tasks suited to this equipment.
- Shafts, gears and irregular industrial components
- Typical incoming oil and particle contamination
- Defined dryness and cleanliness evaluation
- Production output, loading and line connections
From loading to the next operation.
The process brings together workpiece loading, treatment and transfer to the next operation.
Equipment details.
Component surface after cleaning.
Cleaning between machining and assembly.
The cleaning process addresses incoming oil and particles while preparing critical surfaces for the next operation. Dryness and particulate-cleanliness requirements guide the wash and drying sequence.
Handling for your automotive components.
Conveyor, indexed and multistage arrangements accommodate different part flows. Workpiece orientation, fixtures, holes and recesses guide cleaning access and drainage.
Evaluate the finished part.
Sample testing uses representative components and production contamination. Surface appearance, dryness and particulate analysis provide information for selecting the cleaning process.
Your equipment
questions, answered.
Find answers about materials, part handling and inspection or cleaning processes.
How are the cleaning stages selected?
Washing, rinsing, air blow-off and drying are selected for the incoming contamination and required finished part condition. Geometry, cleaning-liquid compatibility and the next production operation also influence the sequence.
Include any specified surface cleanliness and dryness requirements.
How much loading space does a part need?
Loading space includes the component, its supports or fixture, and the clearance required for treatment and transport. Belt width, usable loading width and the process opening are considered separately.
Show the part in its intended loading orientation, including spacing between components.
How is conveyor speed selected?
Conveyor speed works with part spacing and process-zone length to achieve the required output and treatment time. Washing and drying requirements guide the selected movement settings.
Provide the target parts per hour and the planned loading pattern.
What is the difference between output interval and treatment time?
Output interval is the time between finished parts leaving the machine. Treatment time is how long one component stays in a washing or drying zone. Several components can move through different zones at the same time.
Part spacing, conveyor speed and zone length connect output with treatment time.
When is indexed cleaning useful?
Indexed handling is considered when a component needs a fixed position or orientation at a cleaning stage. Fixtures locate the part while the sequence coordinates treatment and transfer.
The required station time, part changes and output guide the equipment arrangement.
Which stages can accompany ultrasonic cleaning?
Ultrasonic cleaning can be combined with rinsing, additional cleaning stages, air blow-off and hot-air drying. Workpiece transfer and drainage connect the stages.
The sequence is selected for the material, contamination and required finish.
How is cleaning performance evaluated?
Surface appearance, dryness and particulate cleanliness are evaluated using the method specified for the component. Photographs show the surface appearance; particle requirements use the specified sampling and measurement method.
Include the required measurement and acceptance criteria in your enquiry.
What should an enquiry for custom cleaning equipment include?
Include the part range, material, incoming contamination, required finish, output and loading preference. Add the available floor space, site services and connections to adjacent equipment.
Drawings and representative samples help develop the equipment proposal.
Can I view technical-cleanliness analysis documents?
Two technical-cleanliness analysis reports are available in the testing and documentation section. They include particle-size results, classifications and microscopy images.
Open the complete PDF to see the extraction and analysis information for each report.
Connect the details.
How to select an industrial parts washer
Compare spray and ultrasonic cleaning separately from conveyor and indexed handling. Use your part geometry, contamination, production load and required result.
Read the guide
How to read a technical cleanliness report
Read extraction conditions, particle size classes and microscopy results with two example reports, then check the acceptance criteria for your component.
Read the guide
Conveyor parts washing systems
Plan conveyor parts washing for continuous production. Compare loading pitch, washing and drying stages, and the handoff to the next station.
Explore the application